Kingston Technology Module ValueRAM 8 Go DDR4 2666 MHz (KVR26N19S8/8)
Fabricant:
KINGSTON TECHNOLOGY
Numéro de produit:KVR26N19S8/8
Voir la fiche produit sur le site du fabricant.Kingston Technology ValueRAM 8GB DDR4 2666MHz, 8 Go, 1 x 8 Go, DDR4, 2666 MHz, 288-pin DIMM, Vert
Kingston Technology ValueRAM 8GB DDR4 2666MHz. composant pour: PC/serveur, Mémoire interne: 8 Go, Disposition de la mémoire (modules x dimensions): 1 x 8 Go, Type de mémoire interne: DDR4, Fréquence de la mémoire: 2666 MHz, Support de mémoire: 288-pin DIMM, Latence CAS: 19, Couleur du produit: Vert
This document describes ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of \n19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:\n\n- Power Supply: VDD=1.2V Typical\n- VDDQ = 1.2V Typical\n- VPP - 2.5V Typical\n- VDDSPD=2.2V to 3.6V\n- Nominal and dynamic on-die termination (ODT) for\n- data, strobe, and mask signals\n- Low-power auto self refresh (LPASR)\n- Data bus inversion (DBI) for data bus\n- On-die VREFDQ generation and calibration\n- Single-rank\n- On-board I2 serial presence-detect (SPD) EEPROM\n- 16 internal banks; 4 groups of 4 banks each\n- Fixed burst chop (BC) of 4 and burst length (BL) of 8\n- via the mode register set (MRS)\n- Selectable BC4 or BL8 on-the-fly (OTF)\n- Fly-by topology\n- Terminated control command and address bus\n- PCB: Height 1.23” (31.25mm)\n- RoHS Compliant and Halogen-Free
This document describes ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of \n19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:\n\n- Power Supply: VDD=1.2V Typical\n- VDDQ = 1.2V Typical\n- VPP - 2.5V Typical\n- VDDSPD=2.2V to 3.6V\n- Nominal and dynamic on-die termination (ODT) for\n- data, strobe, and mask signals\n- Low-power auto self refresh (LPASR)\n- Data bus inversion (DBI) for data bus\n- On-die VREFDQ generation and calibration\n- Single-rank\n- On-board I2 serial presence-detect (SPD) EEPROM\n- 16 internal banks; 4 groups of 4 banks each\n- Fixed burst chop (BC) of 4 and burst length (BL) of 8\n- via the mode register set (MRS)\n- Selectable BC4 or BL8 on-the-fly (OTF)\n- Fly-by topology\n- Terminated control command and address bus\n- PCB: Height 1.23” (31.25mm)\n- RoHS Compliant and Halogen-Free
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Once the user has seen at least one product this snippet will be visible.