Tripp Lite SmartPro, 1350W, 1500VA, 120V AC, 60Hz, 60Hz, 15A, LCD, 570J

Manufacturier:

TRIPP LITE

Product Number:

SMART1500RMXLN

Manufacturer Warranty:

2 Years

See the product sheet on the manufacturer's website.

    1,773.00 $ 1,773.00 $ 1773.0 CAD

    1,773.00 $

    This combination does not exist.

    Add to Cart
    Non disponible en ligne
    Seulement 2 available online

    SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS, 2U Rack/Tower, Exten


    Tripp Lite SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS, Extended Run, SNMP, Webcard pre-installed, 2U Rack/Tower, LCD, USB, DB9 Serial. UPS topology: Line-Interactive, Output power capacity: 1.5 kVA, Output power: 1350 W. AC outlet types: NEMA 5–15R, Power plug: NEMA 5-15P, AC outlets quantity: 8 AC outlet(s). Typical backup time at full load: 4.9 min, Typical backup time at half load: 14 min, Battery recharge time: 4.5 h. Form factor: Rackmount, Product colour: Black, Housing material: Steel. Width: 439.4 mm, Depth: 341.6 mm, Height: 87.6 mm

    Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 95% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and Pre-installed SNMPWEBCARD network interface. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

    - Tripp Lite SMART1500RMXLN line interactive 2U rack/tower UPS with 1500VA / 1.5kVA / 1350W capacity and extended runtime options
    - Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
    - NEMA 5-15P input plug; 8 NEMA 5-15R output receptacles, Two independently switched output load banks
    - Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
    - High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
    - Internal batteries offer 14 minutes at 50% load (675W) and 4.9 minutes at 100% load (1350W)
    - Extended runtime is available with optional BP36V15-2U (limit 1); BP36V42-3U (multi-pack compatible) and BP36V27-2US (multi-pack compatible), Output is reduced to 1200 watts maximum with external battery packs
    - External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
    - Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment
    - Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information
    - LCD interface also supports a number of advanced user setup and operating preferences
    - Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement
    - Built-in USB, RS-232 and Pre-installed SNMPWEBCARD accessory monitoring options
    - HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
    - Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products